Regulator-2 Psi 3/4Fptx3/4Fpt 1.5M Btu

FISHER™ R652E-DFH Two-PSI Regulator FISHER™ R622E and R652E are two-psi service regulators designed for LPG regulator systems. These regulators are UL listed made to be installed downstream from a First-Stage regulator and reduce an inlet pressure of 10 PSI / 0.69 bar to a nominal 2 PSI / 0.14 bar outlet pressure. Two-psi service regulators are designed for domestic applications that supply 2 PSI / 0.14 bar LPG to a line regulator located inside the building. In most cases a manifold is used with corrugated stainless steel tubing (CSST) or other acceptable piping materials for routing to the line pressure regulator supplying 11 in. w.c. / 27 mbar to appliance regulators. FISHER™ R622E and R652E feature a combination relief valve and large vent that provide overpressure protection and exceed UL requirements. Both units have a stainless steel inlet screen to reduce the amount of debris from entering them. Both units are painted green with a white closing cap for easy identification and have a temperature rating of -20 to 160°F / -29 to 71°C Both regulators employ FISHER's fabric-reinforced diaphragm and large diaphragm area provide accurate regulation at increased capacities. They feature built-in 1/8 in. taps (orificed to a number 54-drill size) on the upstream and downstream sides allow for easy gas system checks. Both regulators have a recommended replacement life of 20 years. Type R652E has a back mounted design. Brand: FISHER™ Regulator Type: Two-PSI Capacity: 1,500,000 BTU/H Max. Outlet: 2.2 PSI / 0.69 mbar Min. Outlet: 1 PSI / 0.15 mbar Outlet Set Point: 2 PSI / 0.14 mbar Inlet Connection: 3/4" FNPT Outlet Connection: 3/4" FNPT Inlet Pressure: 10 PSI