• Shopping List
  • Account Application
Toggle Nav
Delivering solutions to fuel and feed the world.
Search
All Categories
Menu

800-437-9702

Divider-Push In-2Way 3/8 Tube In/Out

Overview
This Push In 2Way Divider has a3/8" Tube In by 3/8" Tube Out. G.A. Murdock's Line Of Mur-Lok Polypropylene Fittings Are Designed For Fluid Applications Where Risk Of Chemical Attack And/Or Leak Resistance Is Of Concern.

INSTALLATION Reusable Tubing and Fittings:

  1. When cutting the tubing make sure the ends are cut squarely. The outer surface of the tube should be clean, smooth and free of scratches.
  2. Make sure tubing is fully inserted (even though it may feel blocked) all the way to tube stop.
  3. To insure the tube and fitting are fully connected, pull on the tubing to verify that the tubing and fitting are locked.
  4. Stainless steel teeth on collet prevent tube from separating from the o-ring and ensures a leak-free seal.

Separating Reusable Tubing and Fittings: to remove the tube from the fitting, push the collet in and hold it, then pull the tubing out.

Specifications
Specifications
Brand GA Murdock Inc
Pack Size 1.0000
UOM EA
UNSPSC 40140000
Inlet 3/8 IN
Item Type Fittings
Outlet 3/8 IN
Type 2 Way